Better Pools LLC

Jan 2016

Better Pools LLC recently treated a pool for this red/pink bacterium. All visible signs of this bacterium have disappeared. It is very difficult to guarantee the problem will never reoccur. The reason is there are places the bacterium grows These areas are primarily in the pipes and hoses associated with carrying water to and from the pool. There are various products on the market that treat the problem in the pipes and areas where brushing is impossible. There are also additives you can buy that keep the biofilm from building up as well. The biofilm is a large colony of this bacterium that usually forms where there is little to no sunlight. So thoroughly brushing in the skimmer opening, skimmer basket, and underneath metal ladder steps is essential. In our particular case, the pool has an automatic pool cleaner which runs whenever the pump is on. It is a great aid in keeping the pool surface clean of contaminants that may enter the water, such as dirt, sand, and leaves. The hose that is attached to it, however, became a breeding ground for the bacterium. We had to brush every inch of the hose, especially where the pieces connected to each other. We also had to brush around all the return jets and fixtures attached to the pool’s surface. Hopefully you will never experience this type of pool problem. If you do, we hope this information will help keep your pool bacteria-free! Happy Swimming! - See more at: http://www.venicepoolcleaning.com/red-algae-pink-algae-what-is-it/#sthash.9lkPH4HU.dpuf

Sarasota, FL

May 2015

The pool looked like a pond. The water was so thick & green... you could not see the pool bottom. We killed the algae, but some areas of the surface were staid...we had to test the stains to determine what type they were, then add the proper chemicals. It took 2 weeks for it to work, but it was worth it! Now we have another happy and satisfied customer with Better Pools LLC!

Sarasota, FL

Feb 2016

A filter should be cleaned at least every 4-6 weeks or more often if needed. The first step is to remove the filter from the cartridge. Then connect a nozzle that produces a strong stream of water from the garden hose. Next begin rinsing the filter starting with a 4-6 inch swath rinsing from top to bottom going horizontally, side to side. When you get to the bottom I make sure the debris was washed down & fully removed. Next step is to rotate the filter either to the right or left and clean another swath from top to bottom going side to side. After the entire circumference is completed return the filter to the cartridge & secure the lid down. Then turn the swimming pool pump motor on & make sure there are no leaks or drips coming from the filter lid. If leaking occurs, remove the filter lid & take a cloth & wipe off the top & bottom where the lid connects. Pay special attention to wiping off the black "O" ring. Sometimes a piece of debri can lodge in there & cause the water leak.

Sarasota, FL