Triangle Radiant Barrier

Insulation Contractor - Raleigh, NC

Average rating

info

4.86

4.9

based on 276 online reviews

Average rating

info

4.86

4.9

based on 276 online reviews
based on 276 ratings

Project Gallery

A table showing the projects done by the pro

Photo

Project

Date

Description

Cost

Home

Radiant Barrier on attic floor

May 2017

Installed Radiant Barrier to attic floor, loose overlay on joists over existing batt and blow-in insulation, stapled to decking, Radiant Barrier tape on deck seams. Radiant Barrier reflects 95% of radiant heat, saving homeowners 15-40% on their heating and cooling costs. Radiant Barrier will typically pay for itself in approximately 3 years through energy savings. After that, it's energy savings in the homeowner's pocket and increased resale value for the owner's home.

$1k

Cary, NC

Radiant Barrier in a vented crawlspace

May 2017

Installed Radiant Barrier to crawlspace ceiling, stapled to underside of joists, encapsulating existing batt insulation and all seams taped with Radiant Barrier tape. Installed 10-millimeter thick polyethylene vapor barrier, set in place with heavy-gauge liner staples, 6" roll up on piers, 3" roll up on perimeter wall, all piers and seams taped with vapor barrier tape. Radiant Barrier is a far better thermal insulator than fiberglass batt insulation. It has significant advantages in crawlspaces: it is a full moisture and vapor barrier, it does not deteriorate over time, it is permanent insulation that comes with the lifetime warranty

$2k

Raleigh, NC

Radiant Barrier on attic rafters

May 2017

Installed Radiant Barrier to attic rafters, attached with staples and all seams taped with Radiant Barrier tape. Radiant Barrier reflects 95% of radiant heat, allowing for a cooler attic and an average 15-40% savings on heating and cooling costs.

$2k

Holly Springs, NC

Sealed Crawlspace

May 2017

Installed 10-millimeter thick polyethylene vapor barrier to crawlspace ground, set in place with heavy-gauge liner staples, roll-up 6" on piers, roll-up 3" on perimeter wall, all piers and seams taped with vapor barrier tape. Installed Radiant Barrier to inside of crawlspace exterior wall to seal crawlspace. Attached with furring strips and concrete nails, all panel seams taped with Radiant Barrier tape, top edging sealed with foam, 3" under sill plate remains exposed to facilitate future termite inspections. Radiant Barrier is a better insulator than batt insulation. In combination with it also being a full moisture and vapor barrier, it is an excellent product for use in sealing crawlspaces at an affordable cost.

$3k

Raleigh, NC

Radiant Barrier insulation in a garage

May 2017

Installed White Radiant Barrier to garage walls and ceiling, stapled to studs / joists, all seams taped. White Radiant Barrier is a far better thermal insulator than fiberglass batt insulation and its color can allow for a ‘finished’ look without the expense of drywall. What you see on the garage walls of the 'After' photo is white Radiant Barrier, not drywall.

$1k

Pittsboro, NC