How Much Does It Cost To Install Flagstone Pavers?

Standard Services	Quantity	Low	High
What you can expect
Range per square foot:		$15.57	$20.06
Range for this type of project:		$4,670	$6,018
Estimate: $5,344
	Flagstone Pavers Cost	320 square feet	$1,203	$1,815
	Cost of residential-grade, 1"-thick flagstones sized from 12"x12" to 24"x36". Rate is inclusive of local delivery, as well as standard excess for perfect installation and occasional repairs.
	Flagstone Pavers Labor, Basic	54 hours	$3,282	$3,978
	Labor cost, under typical conditions, for complete installation. Area to be paved will be laid out, marked, and excavated. 4" base gravel, edge border, and 2" of bedding sand will be laid. Stone will be assembled, set, and leveled, and polymer-modified sand added to joints. Rate is inclusive of all aspects of the project, such as thorough planning, acquisition of equipment and material, preparation and protection of project site, and meticulous cleanup.
	Flagstone Pavers Job Supplies	320 square feet	$131	$149
	Requisite supplies for the job, including cutting and grinding materials, mortar, and reinforcement.
	Flagstone Pavers Equipment Allowance	1 job	$54	$76
	Daily rental of specialty equipment that maximizes the quality and efficiency of the work. These include a 115V wet masonry saw, 5-cubic-foot mortar box, and small plate compactor. Consumable equipment elements not included.
Optional Services
	Option: Slab Excavation	6 hours	$385	$467
	Existing sidewalk, slab, or driveway will be excavated with hand tools to a uniform depth (up to 8") below final surface level. Excavation material will be distributed on site.

Standard services

Flagstone Pavers Cost
$1,203 -$1,815

320
square feet

Cost of residential-grade, 1"-thick flagstones sized from 12"x12" to 24"x36". Rate is inclusive of local delivery, as well as standard excess for perfect installation and occasional repairs.

Flagstone Pavers Labor, Basic
$3,282 -$3,978

54
hours

Labor cost, under typical conditions, for complete installation. Area to be paved will be laid out, marked, and excavated. 4" base gravel, edge border, and 2" of bedding sand will be laid. Stone will be assembled, set, and leveled, and polymer-modified sand added to joints. Rate is inclusive of all aspects of the project, such as thorough planning, acquisition of equipment and material, preparation and protection of project site, and meticulous cleanup.

Flagstone Pavers Job Supplies
$131 -$149

320
square feet

Requisite supplies for the job, including cutting and grinding materials, mortar, and reinforcement.

Flagstone Pavers Equipment Allowance
$54 -$76

1
job

Daily rental of specialty equipment that maximizes the quality and efficiency of the work. These include a 115V wet masonry saw, 5-cubic-foot mortar box, and small plate compactor. Consumable equipment elements not included.

Optional Services

Option: Slab Excavation
$385 -$467

6
hours

Existing sidewalk, slab, or driveway will be excavated with hand tools to a uniform depth (up to 8") below final surface level. Excavation material will be distributed on site.

What you can expect

Range per square foot:
$16 - $20

Range for this type of project:
$4,670 - $6,018

Estimate:
$5,344

cost to install flagstone pavers
National Avg. Materials Cost per square foot	$4.89
National Avg. Cost (labor and materials) for 300 square foot	$5,547.67
National Cost Range (labor and materials) for 300 square foot	$4,848.05 - $6,247.29

How Much Does It Cost To Install Flagstone Pavers?

Find out how much your project will cost

cost to install flagstone pavers Calculator

Cost Calculator

Cost Comparison

Install Flagstone Pavers: national average cost

Find out how much your project will cost

Popular Calculators

Top cities for this service